Konica Minolta bizhub C360 Service Manual page 282

Field Service Ver. 2.1 Feb. 2012 10. UTILITY
(5) Erase Leading Edge
• It will be displayed only when the following setting is set to "Level 2".
[Service Mode] → [Enhanced Security] → [Administrator Feature Level]
<Use>
• To set the leading edge erase amount of the paper.
• To change the width of the area not printed along the leading edge of the paper.
• To make this setting independently for Front and Back sides.
<Procedure>
• The default setting is "4 mm".
"4 mm" 5 mm 7 mm
227