Konica Minolta bizhub C360 Service Manual page 736

Field Service Ver. 2.1 Feb. 2012
19.5.184 CEEE3: Printer control board malfunction
Printer control board (PRCB)
Step
1 Check the PRCB connector for proper
connection and correct as necessary.
2 Change PRCB
19.5.185 CFB00 to CFFA0: Abort code
2.1
MFP board (MFPB)
Step
1 Check the MFPB connector for proper
connection and correct as necessary.
2 Conduct the following setting.
[Service Mode] → [Memory/HDD Adj.] →
[Memory Check] → [Detail Check].
When "NG" is displayed, replace the appro-
priate memory or PWB.
WORK0: DIMM0
WORK1: DIMM1
FILE0,1: MFP board
FILE2,3: EIF board
3 Change MFPB
Relevant parts
Action
Relevant parts
Action
WIRING DIAGRAM
Control signal
—
—
DIMM0/DIMM1
EIF board (IC-412)
WIRING DIAGRAM
Control signal
—
—
—
19. TROUBLE CODE
Location (Electri-
cal component)
—
—
Location (Electri-
cal component)
—
—
—
681
2.1