System Settings-Output Settings - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
D. Enter Power Save Mode
(1) Use
• To set whether to immediately switch to the power save mode after printing in case of
receiving the fax/PC print during power save mode.
Normal : Switches to the power save mode according to the normal power save
mode after the printing.
Immediately : Switches to the power save mode immediately after the printing.
(2) Procedure
• The default setting is Immediately.
10.6.2

System Settings-Output Settings

A. Print/Fax Output Settings
(1) Use
• To set the timing for printing for the PC print job or fax received.
Batch Print : Starts printing when all data are received
Page Print : Starts printing every time data for each page are received
(2) Procedure
<Printer>
• The default setting is Page Print.
<Fax>
• The default setting is Batch Print.
NOTE
• [FAX] will be displayed only when the optional fax kit (FK-502) is mounted.
B. Output Tray Settings
• It will be displayed when the optional finisher FS-527 or the job separator JS-505 is
mounted.
(1) Use
• To set the priority output tray for each application (Copy print, Printer, Fax and Print
Reports).
(2) Procedure
• The default settings are as follows.
Copy
Print
Report Output : Tray 2
Fax
• [Tray 3] will be displayed only when the job separator JS-603 is mounted to the finisher
FS-527.
Normal
: Tray 1
: Tray 1
: Tray 2
10. UTILITY
"Immediately"
217