Field Service Ver. 2.1 Feb. 2012
14.3 Billing Setting
14.3.1
Counter Setting
A. Use
• To set the counting method for the total counter, size counter and long length paper
counter.
• To set the size regarded as the large size (2 counts.)
• Use to change the counting method for the counters.
B. Procedure
(1) Total Counter
Mode 1 : 1 count per 1 copy cycle (Default: Japan)
Mode 2 : Large size is double counts
(Default: US, Europe, Others 1, Others 2, Others 3, Others 4)
NOTE
• The content of this setting is reflected in the count method with the key counter.
• "Others 1" to "Others 4" are setting items in [Marketing Area] available from Ser-
vice Mode.
See P.430
(2) Size Counter
• A3/11 x 17
• A3/B4/11 x 17/8
/
1
• A3/11 x 17/B4/8
/
1
2
• Not counted (Default: Japan)
• A3 and 11 x 17 (Default: US)
• A3, B4, 11 x 17, and 8
• A3, B4, Foolscap, 11 x 17, 11 x 14, and 8
NOTE
2
• When the Size Counter setting is set to "Not counted", the machine operate with
following conditions regardless of the each control panel settings.
Total Counter: Mode1
Long Length Paper Count Mode: Mode1
Banner Counter Double Count Mode: OFF
: When it exceeds 279 mm in the main scan direction
and 420 mm in the sub scan direction (exceeds 399
mm at fax scan), it is regarded as the large size.
x 14
: When it exceeds 215 mm in the main scan direction
2
and 355 mm in the sub scan direction (exceeds 337
mm at fax scan), it is regarded as the large size.
x 14/Foolscap : When it exceeds 203 mm in the main scan direction
and 330 mm in the sub scan direction (exceeds 313
mm at fax scan), it is regarded as the large size
(However the size in the main scan direction changes
according to the foolscap size setting.)
/
x 14 (Default: Europe, Others 1, Others 2, Others 3, Others 4)
1
2
/
x 14
1
2
14. BILLING SETTING
517
2