Konica Minolta bizhub C360 Service Manual page 344

Field Service Ver. 2.1 Feb. 2012
(14) Select Server Authentication Method
<Use>
• To set the authentication system when conducting LDAP server authentication.
• To use when changing the server authentication system.
Use Set Value
Use User Authentication ID and Password
Dynamic Authentication : It conducts authentication by dynamic authentication.
<Procedure>
• The default setting is Set Value.
"Set Value"
(15) Referral Setting
<Use>
• To set whether or not to use the referral setting.
• To use when tracing the server with referral at the time of LDAP connection.
<Procedure>
• The default setting is ON.
(16) Login Name
<Use>
• To set the login name to connect to LDAP server.
<Procedure>
1. Touch [Login Name].
2. Enter the logon name (up to 255 characters) on the on-screen keyboard, and touch
[OK].
NOTE
• The setting is not available when authentication method is set to anonymous.
(17) Password
<Use>
• To set the password for connecting to LDAP server.
<Procedure>
1. Touch [Password].
2. Enter the password (up to 128 characters) on the on-screen keyboard, and touch [OK].
NOTE
• The setting is not available when authentication method is set to anonymous.
: It conducts authentication with the setting value set by [LDAP
Server Registration].
: It conducts authentication with the registration data for the
copier's user authentication.
User Authentication
"ON"
10. UTILITY
Dynamic Authentication
OFF
289