Printer Settings-Assign Account To Acquire Device Info; Fax Settings; Fax Settings-Header Information; Fax Settings-Header/Footer Position - Konica Minolta bizhub C360 Service Manual

10. UTILITY
10.6.66

Printer Settings-Assign Account to Acquire Device Info

2
A. Use
• Specify whether this machine requests the password from the Windows printer driver
when the Windows printer driver acquires device information, for example, which options
are installed in this machine.
Yes : Sets a password. By setting a password, the speed at which the printer driver
obtains the machine information increases.
No : Does not set a password. The machine authenticates the printer driver with the
OpenAPI feature.
B. Procedure
• The default setting is No.
10.6.67

Fax Settings

• Settings are available only when the optional fax kit (FK-502) is mounted.
10.6.68

Fax Settings-Header Information

A. Use
• To register the name of the sender and fax ID which will be printed when transmitting fax.
B. Procedure
1. Touch [Sender] and enter the name of the sender (up to 30 characters) on the on-
screen keyboard.
2. Enter Sender Fax No. (up to 20 characters) using the 10-key pad and [+], [Space] dis-
played on the screen.
10.6.69

Fax Settings-Header/Footer Position

A. Header Position
(1) Use
• To set the position to print the header when transmitting fax.
(2) Procedure
• The default setting is Outside Body Text.
NOTE
• [Outside Body Text] cannot be selected for Internet Fax/IP Address Fax.
B. Print Receiver's Name
• It will not be displayed on the screen when [Fax Target] is set to beside "US" or "HK" in
the following settings.
[Service Mode] → [System 1] → [Marketing Area]
(1) Use
• To set whether to print the information of TX destination (Registered name or Fax No.)
when transmitting fax.
(2) Procedure
• The default setting is OFF.
318
2
Yes
Inside Body Text
ON
Field Service Ver. 2.1 Feb. 2012
"No"
"Outside Body Text"
"OFF"
OFF