Service Mode; Billing Setting Function Setting Procedure - Konica Minolta bizhub C360 Service Manual

3. SERVICE MODE

3. SERVICE MODE
• When using i-Option LK-101 v2/102/103 v2/105, license management is done with the
following procedures. [Service Mode] → [Billing Setting] → [License Management]
• [License Management] can set Activation/Deactivation of each i-Option functions,
Repair/Initialize of functions for troubleshooting, or etc.
3.1

Billing Setting function setting procedure

1. Press the Utility/Counter key.
2. Touch [Check Details] on meter count display.
3. Press the following keys in this order.; Stop
NOTE
• When selecting [CE Authentication] under [Enhanced Security] available from Ser-
vice Mode, authentication by CE password is necessary.
Enter the 8 digits CE password, and touch [END].
(The initial setting for CE password is "92729272.")
• When the following setting is set to "ON", CE password authentication is neces-
sary.
[Administrator Settings]
• If a wrong CE password is entered, re-enter the right password. The machine will
not enter Service Mode unless the CE password is entered correctly. To return to
the Basic screen, turn OFF the sub power switch and turn it ON again.
When the following setting is set to "Mode 2", operation will be prohibited since it
indicates authentication failure by failing to enter the correct CE password within
the specified number of times.
if the access lock is activated, the lock release timer starts to operate by input the
→ → →
Stop 0 9 3
after the main power switch is turned OFF and On. When the timer reaches the
time specified in this setting, the access lock is released.
• The service code entered is displayed as "
4. The Service Mode menu will appear.
4
→
[Security Settings]
→ →
1 7 in [Meter Count]
Field Service Ver. 1.1 Feb. 2012
→ → → → →
0 0 Stop 0
→
[Enhanced Security Mode]
→ →
[Check Details]
✽
."
1
[Coverage Rate]
A00JF3E534DA