Konica Minolta bizhub C360 Service Manual page 580

Field Service Ver. 2.1 Feb. 2012
14.3.10 Management Function Choice-Vendor 2
A. Use
• To set whether or not the vendor 2 is installed.
NOTE
• When using the vendor along with the key counter, inserting the key counter will
set it to the "Key Counter Mode" and removing it will set it to the "Vendor Mode".
B. Procedure
• Select color mode and message of key counter.
(Only for key counter, the type of the color mode and message are same after mounting.)
✽ Confirmation copy
• Set whether to allow a confirmation copy when a key counter is installed.
• The default setting is Ban.
✽ The next job reservation
• Set whether to allow the reservation of the next job when a key counter is installed.
• The default setting is Ban.
• Select message of vendor.
✽ Message
Type 1: Message for key counter
Type 2: Message for card scanning
Type 3: Message for ID management
NOTE
• The setting is available only when user authentication and account track are set
"OFF" with [Administrator Settings] → [User Authentication/Account Track] →
[General Setting].
✽ Count Setting
2
• To set the count timing used when the key counter is installed.
• The default setting is paper feed.
License
License
"Paper feed"
14. BILLING SETTING
"Ban"
"Ban"
Paper out
525
2