Konica Minolta bizhub C360 Service Manual page 593

17. JAM DISPLAY
JAM
JAM type
code
⎯
Manual bypass
feed section
11-01 Tray 1 feed
section
11-02
11-40
11-44
⎯
⎯
12-01 Tray 2 feed
section
12-40
⎯
538
Detection timing
• In case paper position is detected as
locating properly after main power switch
is turned ON, door and cover are opened /
closed or jam/trouble reset is done, it is
regarded as paper jam at manual bypass
feed section.
• The leading edge of the paper does not
unblocked the sensor in front of tim. roller
(PS1) even after the lapse of a given
period of time after the tray1 starts to feed
paper.
• For paper fed from the tray1, due to a
delay in paper arrival, loop forming in front
of the timing roller is not complete before
the rise timing of the registration motor.
• For paper fed from the tray1, the image
write start signal permit continues to be
disabled for a predetermined period of
time after the timing of the image write
start signal output.
• At the start of paper feed retry, the sensor
in front of tim. roller (PS1) has already
detected paper passage.
• Paper feed tray 1 paper feed sensor
(PS23) is turned ON when the main power
switch is turned ON, a door or cover is
opened and closed, or a misfeed or mal-
function is reset.
(bizhub C360/C280 only)
• In case paper position is detected as
locating properly after main power switch
is turned ON, door and cover are opened /
closed or jam/trouble reset is done, it is
regarded as paper jam at tray 1 feed sec-
tion.
• The leading edge of the paper does not
turn ON the paper feed tray 2 vertical
transport sensor (PS19) even after the
lapse of a given period of time after the
tray 2 starts to feed paper.
• For paper fed from the tray 2, the image
write start signal permit continues to be
disabled for a predetermined period of
time after the timing of the image write
start signal output.
• Paper feed tray 2 vertical transport sensor
(PS19) is turned ON when the main power
switch is turned ON, a door or cover is
opened and closed, or a misfeed or mal-
function is reset.
Field Service Ver. 2.1 Feb. 2012
Misfeed processing
location
Right door
Right door
Tray 1
Right door
Tray 2
Ref.
page
P.554
P.555
P.555