Openapi Authentication Management-Restriction Code Setting; 10.7 Banner Printing; 10.8 My Panel Settings - Konica Minolta bizhub C360 Service Manual

10. UTILITY
10.6.96

OpenAPI Authentication Management-Restriction Code Setting

A. Use
• These are communication settings for the application which is developed by the third
vendor.
Do not set or change these settings without vendor's instructions.

10.7 Banner Printing

• It will not be displayed when the following setting shows that vendor is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
A. Use
• To shift to the banner printing mode.
• To use when printing on the long size paper.
B. Procedure
1. Set the long size paper to the bypass tray.
2. Touch [Banner Printing], and touch [ON].
3. Send the job for the long paper print.
4. Touch [Finish] to finish banner printing mode.
NOTE
• Only PC print is available for the long paper print.
• Normal job cannot be accepted during banner printing mode.

10.8 My Panel Settings

• This is displayed only when a registered user is logging in after user authentication.
However, this is not displayed when both management device 2 and user authentication
are used.
A. Use
• To make various settings about My Panel.
• To customize My Panel screen for individual registered users.
• Items that can be set are as follows:
Language Setting, Measurement Unit Setting, Copier Settings, Scan/Fax Settings, Color
Selection Setting, Main Menu Settings, and Initial Screen Setting
B. Procedure
1. Touch [My Panel Settings].
2. Touch a key that represents a desirable item and change its settings.
NOTE
• Registering, editing, and deleting My Panel settings are allowed only when logging
in as a registered user.
• When My Panel is not customized, the settings for MFP take effect in the three of
the control panel settings, Language setting, Measurement unit setting, and Color
selection setting.
• Depending on the functions provided by each MFP and the optional device config-
uration, not all My Panel settings may not take effect.
356
Field Service Ver. 2.1 Feb. 2012