Konica Minolta bizhub C360 Service Manual page 489

12. SERVICE MODE
B. Address Registration Data
(1) Use
• To clear address registration data.
• Use this feature to initialize address registration data.
• The following are address registration data:
Group address data, Program key data, One-touch destination data, Mail body data,
Subject data, Prefix/suffix data
(2) Procedure
1. Select the key as follows.
[System 1] → [Initialization] → [Address Registration Data].
2. Press the Start key.
3. When [OK] is displayed, turn off the main power switch and turn it on again more than
10 seconds after.
C. Fax Setting Data
(1) Use
• To clear fax-related settings and parameters. However, address-related data is not
cleared.
• Use this feature to clear fax-related settings and parameters at a time.
(2) Procedure
1. Select the key as follows.
[System 1] → [Initialization] → [Fax Setting Data].
2. Press the Start key.
3. When [OK] is displayed, turn off the main power switch and turn it on again more than
10 seconds after.
D. All History Data
(1) Use
• To clear history data.
• The following are history data:
Job history, Journal history, Receive reject history, Destination history,
Job secure counter (Internal data for history management)
(2) Procedure
1. Select the key as follows.
[System 1] → [Initialization] → [All History Data].
2. Press the Start key.
3. When [OK] is displayed, turn off the main power switch and turn it on again more than
10 seconds after.
E. Network Setting Data
(1) Use
• To clear network-related settings.
• Use this feature to initialize and set network-related settings again when the machine
does not work properly upon change of network-related settings.
(2) Procedure
1. Select the key as follows.
[System 1] → [Initialization] → [Network Setting Data].
2. Press the Start key.
3. When [OK] is displayed, turn off the main power switch and turn it on again more than
10 seconds after.
434
Field Service Ver. 2.1 Feb. 2012