12. SERVICE MODE
12.9.22
Install Data
A. Use
• To install movie help data or OCR dictionary data into HDD.
• To use when the logical format of the hard disk is performed.
• To install each data into the machine HDD via USB memory device.
B. Procedure
NOTE
• To use OCR function, the optional i-Option LK-105 must be activated.
1. Save data (*.tar) into the root directory of a USB memory device.
2. Connect the USB memory device to the machine USB port.
3. Select the key as follows.
[System 2] → [
4. Touch [Movie Data] or [OCR Dictionary].
You can select the above two types of data at a time and install them.
5. Touch [Set].
6. Press the Start key to install the data.
7. Check result "OK" is displayed and touch [END].
NOTE
• If data is already installed, it is necessary to delete old data before installing new
one.
* To delete registered data, select the data to be deleted and touch [Delete]. Check result
"OK" is displayed.
12.9.23
Bluetooth Settings
A. Use
• To set whether to enable or disable the Bluetooth function.
• Use this setting upon set-up of the optional local interface kit EK-605.
B. Procedure
• The default setting is Invalid.
452
] → [Install Data].
Effective
Field Service Ver. 2.1 Feb. 2012
"Invalid"