Konica Minolta bizhub C360 Service Manual page 599

17. JAM DISPLAY
JAM
JAM type
code
72-16 Job separator
2
transport sec-
tion
72-17 FS transport
section
544
2
Detection timing
<When JS-505 is installed>
• The lower tray exit sensor (PS1) is not
turned ON even after the set period of
time has elapsed after the copier's paper
exit sensor (PS3) is turned ON by the
paper.
• The upper tray exit sensor (PS2) is not
turned ON even after the set period of
time has elapsed after the copier's paper
exit sensor (PS3) is turned ON by the
paper.
• The lower tray exit sensor (PS1) is not
turned OFF even after the set period of
time has elapsed after the copier's paper
exit sensor (PS3) is turned OFF by the
paper.
• The upper tray exit sensor (PS2) is not
turned OFF even after the set period of
time has elapsed after the copier's paper
exit sensor (PS3) is turned OFF by the
paper.
• The paper exit sensor (PS25) is not turned
OFF even after the set period of time has
elapsed after the copier's paper exit sen-
sor (PS3) is turned ON by the paper.
• The lower tray exit sensor (PS1) is turned
ON when the power switch is set to ON, a
door or cover is opened and closed, or a
misfeed or malfunction is reset.
• The upper tray exit sensor (PS2) is turned
ON when the power switch is set to ON, a
door or cover is opened and closed, or a
misfeed or malfunction is reset.
<When FS-527 is installed>
• The paper passage sensor/2 (PS2) is not
turned ON even after the set period of
time has elapsed after the paper passage
sensor/1 (PS1) is turned ON by the paper.
• The paper passage sensor/2 (PS2) is not
turn OFF even after the set period of time
has elapsed after it turns ON.
<When FS-529 is installed>
• The paper passage sensor/2 (PS10) is not
turned ON even after the set period of
time has elapsed after the paper passage
sensor/1 (PS1) is turned ON by the paper.
• The paper passage sensor/2 (PS10) is not
turned OFF even after the set period of
time has elapsed after the paper passage
sensor/2 (PS10) is turned ON by the
paper.
Field Service Ver. 2.1 Feb. 2012
Misfeed processing
location
Misfeed clearing
cover
Horizontal convey-
ance cover
Front door
Ref.
page
P.562
P.563