Konica Minolta bizhub C360 Service Manual page 458

Field Service Ver. 2.1 Feb. 2012
http (bilateral communication)
Step
6 Setting the date and time for CS Remote Care
1. Select [Service Mode] → [CS Remote Care], and touch [Detail Setting].
2. Touch [Date & Time Setting].
3. Input the date, time and the time zone using the 10-key pad, and touch [Set].
See P.414
7 Setting the Center ID
1. Select [Service Mode] → [CS Remote Care], and touch [Detail Setting].
2. Touch [Machine Setting] → [Center ID], and input the Center ID (five digits).
See P.414
8 Confirm the Device ID
1. Select [Service Mode] → [CS Remote Care], and touch [Detail Setting].
2. Touch [Machine Setting] → [Device ID], and input Device ID (13 digits).
NOTE
• [Device ID] displays the serial number that is entered in [Service Mode] → [System 1] →
[Serial Number].
9 Encryption setting
1. Select [Service Mode] → [CS Remote Care], and touch [Detail Setting].
2. Touch [Basic Setting] → [Client Setting] and select either Encryption or No Encryption.
10 Heart Beat *1
1. Select [Service Mode] → [CS Remote Care] → [Detail Setting], and touch [Heart Beat].
2. In [Communication], set whether or not to enable Heart Beat communication. (Default: Yes)
3. Touch [Comm. Interval] and enter a Heart Beat transmission interval (1 to 256 minutes,
Default: 30 minutes).
4. In [Specified Transmission], set whether or not to enable Heart Beat transmission at a speci-
fied interval. (Default: Yes)
5. Touch [Hour] and [Minute] and enter a time for specified transmission.
11 Proceed to step 12.
12 Setting the http server
1. Select [Service Mode] → [CS Remote Care], and touch [Server Set].
See P.421
2. Touch [HTTP Server Settings] and set a URL address, account, password, and port number.
3. Touch [Proxy/SSL] and make proxy server and SSL settings.
13 Setting the DIPSW for CS Remote Care
NOTE
• This setting is not normally necessary. Take this step only when necessary in a specific
connecting condition.
(unilateral communication: Device to Center)
Procedure
Notification Setting
1. Select [Service Mode] → [CS Remote Care]
→ [Detail Setting], and touch [Notification
Setting].
2. Touch [Schedule] and set the schedule of
periodic transmission.
See P.414
3. Touch [Center Notifi. Item] and set items that
will be reported to the Center.
See P.414
12. SERVICE MODE
http
403