Security Settings-Stamp Settings - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
D. Authentication Time Setting
• It will be displayed only when the following setting shows that authentication device 1 is
mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(1) Use
• To set the authentication mode when authentication device is used.
• To change the authentication mode when authentication device is used.
Keep Card
Touch and Print : Card is placed only when authentication is made with the device and
• When selecting "Touch and Print", authentication reset is set after completing the job in
[Authentication Time].
(2) Procedure
<Authentication Method>
• The default setting is Touch and Print.
<Authentication Time>
• The default setting is 1 min.
<Authentication Log-out When Job is Completed>
• The default setting is Yes.
10.6.90

Security Settings-Stamp Settings

A. Apply Stamps
(1) Use
• Selects whether to add a stamp to documents when jobs are printed or fax/scanned data
is sent.
(2) Procedure
• The each default setting is Do Not Apply.
• Touch "Apply" to make stamp settings independently for print and transmission modes.
B. Delete Registered Stamp
(1) Use
• Deletes registered stamps, and copy protect/repeat stamps.
(2) Procedure
1. Touch [Delete Registered Stamp].
2. Select [Stamp] or [Copy Protect/Stamp Repeat].
3. Select [Yes] on the confirmation screen and touch [OK] to delete the registered stamps.
: Authentication is available leaving the card in the given place when
making authentication with the device.
if the card is left for a given time (authentication reset time) the
authentication setting is reset.
Keep Card
1 to 30 min.
"Yes"
Apply
10. UTILITY
"Touch and Print"
No
"Do Not Apply"
353