Konica Minolta bizhub C360 Service Manual page 601

17. JAM DISPLAY
JAM
JAM type
code
72-22 FS transport
section
72-26 SD paper exit
section
72-43 PK JAM
72-81 FS staple
section
72-85 SD staple
section
72-86 SD transport
section
72-87
546
Detection timing
<When FS-527 is installed>
• The tray1 path sensor (PS6) is not turned
ON even after the set period of time has
elapsed after the registration sensor
(PS10) is turned ON by the paper.
• The tray1 path sensor (PS6) is not turn
OFF even after the set period of time has
elapsed after it turns ON.
<When FS-527+SD-509 is installed>
• The paper detection sensor/2 (PS44) is
not turn OFF even after the set period of
time has elapsed after it turns ON.
<When FS-527+PK-517 is installed>
• Though the punch home sensor/1
(PS100) is not turned ON after the punch
motor/1 (M100) starts rotating forward,
PS100 is turned ON after M100 starts
rotating backward.
• Though the stapler sensor is not turned
ON after the stapler motor starts rotating
forward, the stapler sensor is turned ON
after the stapler motor starts rotating back-
ward.
<When FS-527+SD-509 is installed>
• Though the saddle stapler home sensor is
not turned ON after the saddle stapler
motor starts rotating forward, the saddle
stapler home sensor is turned ON after
the saddle stapler motor starts rotating
backward.
<When FS-527+SD-509 is installed>
• The paper detection sensor/1 (PS43) is
not turned ON even after the set period of
time has elapsed after the saddle path
sensor (PS11) is turned ON by the paper.
<When FS-527+SD-509 is installed>
• The paper detection sensor/2 (PS44) is
not turned ON even after the set period of
time has elapsed after the saddle path
sensor (PS11) is turned ON by the paper.
Field Service Ver. 2.1 Feb. 2012
Misfeed processing
location
Front door
Front door, stacker
unit
Front door
Front door, Front
cover
Front door, stacker
unit
Ref.
page
P.565
P.565
P.566
P.566
P.566
P.567
P.567