Field Service Ver. 2.1 Feb. 2012
12.17 Internet ISW
• By using this setting, the firmware stored in the server can be downloaded over internet
for upgrading.
• For details for upgrading the firmware, refer to "FIRMWARE REWRITING" in the Mainte-
nance section.
See P.148
12.17.1
Internet ISW Set
A. Use
• To set whether or not to enable each setting for Internet ISW.
• To use when upgrading the firmware by Internet ISW.
• Each setting such as Server setting will be valid by setting this to "ON".
NOTE
• When the following setting is set to "ON", this setting will automatically be set to
"OFF" and cannot be changed.
[Administrator Settings] → [Security Settings] → [Enhanced Security Mode]
B. Procedure
• The default setting is OFF.
12.17.2
HTTP Setting
• It will be displayed only when [Internet ISW Set] is set to "ON".
12.17.3
HTTP Setting-Data Input Setting
A. Use
• To set whether or not to enable downloading using the HTTP protocol.
• To use when accessing the server using the HTTP protocol.
• Setting on the proxy server will be valid when this setting is "ON".
B. Procedure
• The default setting is OFF.
12.17.4
HTTP Setting-Connect Proxy
A. Use
• To set whether or not to connect via proxy server when accessing the server.
• To use when accessing the server via proxy server.
B. Procedure
• The default setting is OFF.
ON
ON
ON
12. SERVICE MODE
"OFF"
"OFF"
"OFF"
505