Konica Minolta bizhub C360 Service Manual page 469

12. SERVICE MODE
C. Detail Setting
(1) Basic Setting (E-Mail1, E-Mail2, Modem or Fax)
<Use>
• Execute the primary setting.
• Use to change the set contents.
• Use to register the machine to the CS Remote Care center.
<Procedure>
1. Call the Service Mode to the screen.
2. Touch [CS Remote Care].
3. Touching the [Detail Setting] will display the primary setting.
<Center Setting>
• Set the center ID, Device ID, and the phone No.
• When e-mail is selected for system and all setup procedures are completed, e-mail
address of the center is displayed.
* When entering the phone number, 10-keys and keys on the screen have following mean-
ings.
[-] Pose : Waits to start transmitting after dialing
[W] Wait : Detects the dial tone of the other end
[T] Tone dial : Carry out tone dialing
[P] Pulse dial : Carry out pulse dialing
[*], [#] : To be used as necessary
<Schedule (Only when the [E-Mail2] is selected)>
• Set the schedule of notification to the center.
• Up to three different notification schedules can be registered.
• Select the notification cycle from [Day], [Week], or [Month].
When selecting [Day] for the notification cycle, set the Day Frequency.
When selecting [Week] for the notification cycle, set the Week Frequency and day of the
week.
When selecting [Month], set the Month Frequency and the date of the month.
<Center Notification (Only when the [E-Mail2] is selected)>
• Select the items of data that will be sent to the center in one-way transmission through E-
Mail2.
• The following table shows each of the notification item keys and corresponding data.
[1] Sales count data
[2] Error count data
[3] Service count data
[4] Life count data
Life cycle data
[5] CSRC-System data
Device config data
[6] History data
NOTE
• Multiple items of data can be selected and sent at one time. However, be sure that
only EKC data cannot be sent together with other items of data.
414
Field Service Ver. 2.1 Feb. 2012
[7] EKC data
[8] Adjustment data
[9] Coverage data
[10] Not used
[11] Not used
[12] Not used