Configuring Ieee 802.1X Authentication; Using The Cli To Configure 802.1X Authentication Information; Table 6: Cli Commands For The 802.1X Supplicant - D-Link DWL-8600AP Administrator's Manual

Unified access point (ap)
Hide thumbs Also See for DWL-8600AP:
Table of Contents

Advertisement

D-Link UAP
In the following example, the administrator uses the CLI to set the management VLAN ID to 123 and to disable the untagged
VLAN so that all traffic is tagged with a VLAN ID.
D-Link-WLAN-AP# set management vlan-id 123
D-Link-WLAN-AP# set untagged-vlan status down
D-Link-WLAN-AP# get management
Property
Value
------------------------------
vlan-id
123
interface
brvlan123
static-ip
10.90.90.91
static-mask
255.0.0.0
ip
10.254.24.43
mask
255.255.248.0
mac
00:02:BC:00:14:E8
dhcp-status
up
D-Link-WLAN-AP# get untagged-vlan
Property
Value
---------------
vlan-id
1
status
down
D-Link-WLAN-AP#
C
IEEE 802.1X A
ONFIGURING
On networks that use IEEE 802.1X, port-based network access control, a supplicant (client) cannot gain access to the
network until the 802.1X authenticator grants access. If your network uses 802.1X, you must configure 802.1X authentication
information that the AP can supply to the authenticator.
If your network uses IEEE 802.1X see
802.1X by using the Web interface.
U
CLI
C
SING THE
TO
The following table shows the commands used to configure the 802.1X supplicant information using the CLI.
Action
View 802.1X supplicant settings
Enable 802.1X supplicant
Disable 802.1X supplicant
Set the 802.1X user name
Set the 802.1s password
In the following example, the administrator enables the 802.1X supplicant and sets the user name to wlanAP and the
password to test1234.
Page 24

Configuring IEEE 802.1X Authentication

UTHENTICATION
"Configuring 802.1X Authentication" on page 65
802.1X A
ONFIGURE

Table 6: CLI Commands for the 802.1X Supplicant

Command
get dot1x-supplicant
set dot1x-supplicant status up
set dot1x-supplicant status down
set dot1x-supplicant user <name>
set dot1x-supplicant password <password>
I
UTHENTICATION
NFORMATION
Software User Manual
for information about how to configure
34CSFP6XXUAP-SWUM100-D13
12/10/09

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents