Basic Installation; Hardware Setup; Method 1 - Poe With Poe Switch Or Router - D-Link DAP-2660 User Manual

D-Link DAP-2660 User Manual
To power the access point, you can use one of the following 3 methods:
Method 1 - Use if you have a PoE switch or router.
Method 2 - Use if you do not have a PoE switch or router and do not have a power outlet near the location of the access point.
Method 3 - Use if you do not have a PoE switch or router and have a power outlet near the location of the access point.

Method 1 - PoE with PoE Switch or Router

1. Connect one end of your Ethernet cable to the LAN1 (PoE) port on the access point.
2. Connect the other end into one port on a PoE switch or router.

Basic Installation

Hardware Setup

DAP-2660
PoE Switch or Router
8