Utility Commands - D-Link DAP-3220 Reference Manual

Help Command:
help Display CLI Command List
Ping Command:
ping Ping
Restart and Exit Commands:
set factorydefault Restore to Default Factory Settings
Reboot Access Point. It is necessary to reboot the AP after making
reboot
configuration changes for those changes to take effect.
quit Logoff
Version Display Command:
version Displays the currently loaded firmware version
System Status Command:
get cpuloadlimit Get CPU load limit
get cpuloadperiod Get CPU load period
set cpuloadlimit Set CPU Load Limit
set cpuloadperiod Set CPU Load Period
Addminstration Command:
get uptime Display UpTime
get login Display Login User Name
set login Modify Login User Name
set password Modify Password
get systemname Display Access Point System Name
set systemname Specify Access Point System Name
get ifping Display Ping control status
set ifping Set ping Allowed to enable or disable
get wlanManage Display manage AP with WLAN Mode
set wlanManage Set manage AP with WLAN Mode
802.11 b/g Access Point Command Line Interface Manual
Function
Function
Function
Function
Function
Function
7
3
U
TILITY
Syntax
help or ?
Syntax
ping <xxx.xxx.xxx.xxx>
Syntax
set factorydefault
reboot
quit
Syntax
version
Syntax
get cpuloadlimit
get cpuloadperiod
set cpuloadlimit [0-100]
set cpuloadperiod [0-100]
Syntax
get uptime
get login
set login <username>
set password
get systemname
set systemname <name>
get ifping
set ifping
get wlanManage
set wlanManage [disable: enable]
C
OMMANDS