Section 3 - Configuration
This section will allow you to change the local network settings of the access point and to configure the DHCP settings.
Device Name:
Enter the Device Name of the AP. It is recommended
to change the Device Name if there is more than
one D-Link device within the subnet.
LAN Connection
Use the drop-down menu to select Dynamic IP
Type:
(DHCP) to automatically obtain an IP address on
the LAN/private network.
My IPv6
Select from the drop-down menu the type of IPv6
Connection Type:
connection you would like to use.
D-Link DAP-1360L User Manual
LAN Settings
46