Lan - D-Link NUCLIAS CONNECT DAP-2620 User Manual

Web User Interface
LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DAP-2620.
These settings may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal
network and cannot be seen on the Internet.
Get IP From
Click the drop-down menu to select IP address
setting mode.
y Static IP (Manual): Select this setting to
assign a static IP address to the device.
y Dynamic IP (DHCP): Select this setting to
obtain an IP address from a DHCP server on
the network.
IP Address
Enter the IP address to assign a static IP address
Subnet Mask
Enter the subnet mask. All devices in the
network must share the same subnet mask.
Default Gateway
Enter the IP address of the gateway/router in
your network.
DNS
Enter a DNS server IP address. This is usually the
local IP address of your gateway/router.
Save Click to save the updated configuration.
To make the updates permanent, click
Configuration > Save and Activate.
D-Link DAP-2620 User Manual

LAN

23