Lan - D-Link NUCLIAS CONNECT DAP-2610 Manual

D-Link DAP-2610 User Manual
LAN is short for Local Area Network. This is your internal network. These are the IP settings of the LAN interface for the DAP-2610. These settings
may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and
cannot be seen on the Internet.
Get IP From: Dynamic IP (DHCP) is chosen here. Choose this option
if you have a DHCP server in your network, or if you wish
to assign a static IP address to the DAP-2610. When
Dynamic IP (DHCP) is selected, the other fields here will
be grayed out. Please allow about 2 minutes for the DHCP
client to be functional once this selection is made.
IP Address: Assign a static IP address that is within the IP address
range of your network.
Subnet Mask:
Enter the subnet mask. All devices in the network must
share the same subnet mask.
Default Gateway: Enter the IP address of the gateway/router in your
network.
DNS:
Enter a DNS server IP address. This is usually the local IP
address of your gateway/router.

LAN

23