Analog Devices adsp-2100 Manual page 428

ALU / MAC with DATA & PROGRAM MEMORY READ
The same data register may be used as a source for the arithmetic
operation and as a destination for the memory read. The register supplies
the value present at the beginning of the cycle and is written with the
value from memory at the end of the cycle.
For example,
(1) MR=MR+MX0*MY0(UU), MX0=DM(I0, M0), MY0=PM(I4,M4);
is a legal version of this multifunction instruction and is not flagged by the
assembler. Changing the order of clauses, as in
(2) MX0=DM(I0, M0), MY0=PM(I4,M4), MR=MR+MX0*MY0(UU);
results in an assembler warning, but assembles and executes exactly as the
first form of the instruction. Note that reading example (2) from left to
right may suggest that the data memory value is loaded into MX0 and
MY0 and subsequently used in the computation, all in the same cycle. In
fact, this is not possible. The left-to-right logic of example (1) suggests the
operation of the instruction more closely. Regardless of the apparent logic
of reading the instruction from left to right, the read-first, write-second
operation of the processor determines what actually happens.
Status Generated:
single operation version of the selected arithmetic operation.
<ALU> operation
ASTAT: 7 6
SS MV AQ AS
- -
AZ Set if result equals zero. Cleared otherwise.
AN Set if result is negative. Cleared otherwise.
AV Set if an overflow is generated. Cleared otherwise.
AC Set if a carry is generated. Cleared otherwise.
AS Affected only when executing the Absolute Value operation
(ABS). Set if the source operand is negative.
All status bits are affected in the same way as for the
5 4 3
AC AV AN AZ
- * *
(instruction continues on next page)
MULTIFUNCTION
2 1 0
* * *
15
15 – 105