User Name - Hitachi Compute Blade 2000 User Manual

10 When setting is completed, click OK in the properties screen to apply the setting.
The procedure above can allow you to register an anonymous user.
Then select Management tools > Active Directory Users and Computers to give
access to an anonymous user.
 Registering the user account for logging in
to the management module and the server blade
In Management Tools > Active Directory Users and Computers, register the user
account for the LDAP directory. For details about how to register user accounts, see
the documentation of your Windows server.
This section describes the limitations for user names and passwords to be registered
and the procedure for granting role information to be used after logging in to
management modules or BMC.

User name

The following characters and the number of characters are available for user names.
Number of characters
Available characters for the head of a
name
Available characters for from the second
to the end of a name
Password
The following characters and the number of characters are available for passwords.
Number of characters
Available characters
The complexity of passwords depends on the security
policy of your Windows server.
Granting role information
By granting role information to a user account registered with the LDAP directory,
you can set the range of operations to be performed after the login.
If you do not grant role information, operations you can
perform after the login are minimized.
: From 1 to 32 characters
: [A-Z] [a-z]
[A-Z] [a-z] [0-9] , "-" (hyphen), "_" (underscore),
"." (period)
: From 1 to 32 characters
: Printable characters in ASCII (0x20-0x7e)
1733