20
The following message displays after the call is answered.
SINGLE LINE TELEPHONE
This feature can cover SLT extensions, however an SLT cannot
perform the call coverage function. The SLT extension need
not be physically installed, only the SLT card must be installed.
Call Forward
The Call Forward feature allows a station the ability to have
calls (internal or external) forwarded to a designated station, a
UCD group pilot number, Voice Mail group number, or Hunt
group. This feature must be enabled in admin programming.
To activate Call Forwarding:
1. Lift the handset or press the ON/OFF button, press the FWD
button or dial [640], then dial the appropriate forwarding
condition code.
[6] = All Calls
[7] = No Answer
-or-
Use the applicable Soft Key's ALL-FWD, N/A-FWD, BSY-FWD,
or B/NA-FWD option.
2. Press the DSS button of desired station,
-or-
Dial the desired extension number where to forward calls,
including UCD, Voice Mail, Hunt Group pilot numbers and
Speed Dial bins for off-net forwarding.
3. Replace the handset or press the ON/OFF button.
C A LL F O R S TA X X X X
F R O M S TA Y Y Y Y
[8] = Busy
[9] = Busy/No Answer
Call Forward
H H :M M a m