4-6
Position
The system identifies three maximum programmable stations as
Attendants for line recalls and Attendant features. The first programmed
Attendant can enter system date and time information and System
Speed numbers from this position without entering the programming
mode. The
Attendant pressing the NIGHT (DND) button or dialing the NIGHT code.
Preset Forward
System programming allows programming of the Attendant station so if
the Attendant is busy or not there, the call is automatically forwarded to
another station or group (VM, Hunt, ACD, or UCD) after a programmed
time period. (Refer to Call Forward, Station, andPreset features.)
Recall
A held CO call left unattended by a station recalls the Attendant(s) after a
programmable time period elapses. A recalling CO line flashes at a
distinctive rate and has an LCD display that identifies the originating
station of the unanswered call.
Special Ring Mode
The Special Ring Mode feature provides an additional ring mode that is
manually invoked by the Attendant. This mode provides a third ring list
so that the system has a day ring mode, a night ring mode, and a special
ring mode. Each CO line can have a special mode ring assignment
associated to it. Up to ten stations per CO line may ring in the special
mode. By default, no stations are programmed to ring in the special ring
mode.
Time and Date Programming
The Time/Date Programming feature allows the first programmed
Attendant to set the time and date without entering the programming
mode.
Triad-S
System is placed in Night Service by any programmed
Attendant Features