Pause Timer; Pbx Dialing Codes; Personalized Messages; Custom - Vodavi Starplus Triad-S Product Description Manual

Pause Timer

Pause Timer
When dialing a speed number, a timed pause between digit sending can
be placed in the number. The length of this pause can be programmed in
the system database.

PBX Dialing Codes

Five one or two-digit access codes can be entered into memory. When
one of these codes is dialed, it signals the KSU that the user is dialing a
PBX access code, not dialing directly over an outside CO line, and to apply
toll restriction to the next dialed digits after the code. Therefore, toll
restriction is not applied to the station unless one of these five PBX codes
is dialed first. This allows dialing of PBX extensions 100, 110, 111, etc. and
functions on lines marked as PBX lines in programming.

Personalized Messages

Each station not forwarded, can select a pre-assigned message to display
on the LCD of the digital key telephone calling that station.
There are ten possible messages which can be displayed:
00 = (clears message)
01 = On Vacation
02 = Return AM
03 = Return PM
04 = Return Tomorrow
05 = Return Next Week

Custom

The Custom Message feature allows the system administrator to enter up
to ten custom messages for use by station users of the system. These
messages may be specified and customized by the customer on a
system-wide basis.
06 = On Trip
07 = In Meeting
08 = At Home
09 = On Break
10 = At Lunch
2-63