Incoming Intercom Ringing; Call Forward Button - Vodavi Starplus Triad-S System Programming Manual

2-44

Incoming Intercom Ringing

Call Forward Button

Technical Manuals Online! - http://www.tech-man.com
Programming Steps
1. Press the INC ICM RING flex button (FLASH 07, Button #2). The
following message displays:
IN C IC M R IN G
R ED 1 20 IPM FLU T TER
2. Enter a valid number (00-28) on the dial pad to correspond to one of
the 29 available options. Refer to
3. Press HOLD to save the entry. A confirmation tone is heard and the
display updates.
Description
The Incoming Intercom Ringing flash rate is the rate an Incoming DSS
button flashes if you have a DSS appearance for the calling station. This
flash rate can be programmed to 29 different options identified in the
flash rate table. This enables the programmer to customize the key
system configuration to desired flash rates.
By default, the Incoming Intercom Ringing flash rate is set for RED
120 ipm Flutter (11).
Programming Steps
1. Press the CALL FORWARD BTN flex button (FLASH 07, Button #3).
The following message displays:
CAL L F OR WAR D BT N
R ED S TEA DY ON
2. Enter a valid number (00-28) on the dial pad to correspond to one of
the 29 available options. (Refer to
3. Press HOLD to save the entry. A confirmation tone is heard and the
display updates.
Programmable Flash Rates
0 0-2 8
Table 2-6: Flash Rates.
0 0-2 8
Table 2-6: Flash Rates.)