Incoming Co Line Ringing; Incoming Intercom Ringing - Vodavi STARPLUS Triad 1 System Programming Manual

2-46

Incoming CO Line Ringing

Programming Steps
1. Press the INC CO RING flex button (FLASH 07, Button #1). The
2. Enter a valid number (00-28) on the dial pad that correspond to one
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
The Incoming CO Line Ringing flash rate is the rate at which an Incoming
CO line or Loop Button flashes. This flash rate can be programmed to
29 different options identified in the flash rate table, which enables the
programmer to customize the key system configuration to desired flash
rates. By default, the Incoming CO Ringing flash rate is set for RED 480
ipm Flutter (08).

Incoming Intercom Ringing

Programming Steps
1. Press the INC ICM RING flex button (FLASH 07, Button #2). The
2. Enter a valid number (00-28) on the dial pad to correspond to one of
3. Press HOLD to save the entry. A confirmation tone is heard and the
following message displays:
IN C CO R IN G
R ED 4 80 IPM FLU T TER
of the 29 available options. (Refer to
display updates.
following message displays:
IN C IC M R IN G
R ED 1 20 IPM FLU T TER
the 29 available options. Refer to
display updates.
Programmable Flash Rates
0 0-2 8
Table 2-6: Flash
0 0-2 8
Table 2-6: Flash Rates.
Rates.)