Voice Mail
4. Dial the three-digit Voice Mail group pilot number (440–
447) for the group (1–8) where calls are to be forwarded.
A confirmation tone sounds.
5. Replace handset or press ON/OFF button.
Retrieving Voice Messages
To enter the Voice Mail system to check for mail:
Dial the Voice Mail group number, or press the
pre-programmed VM GROUP flexible button or flashing
MESSAGE WAIT button. You will immediately be
prompted to enter the password for your mail box.
Voice Mail Transfer with ID
While on a call and the distant end wishes to leave a Voice
Message for a VM user:
1. At the initiating station, press the TRANS button.
2. Dial the Voice Mail Group number or press the
pre-programmed VM GROUP flexible button.
3. Dial the VMID (Mail Box location) of the desired party and
go on-hook.
The system then makes the connection to an available
Voice Mail port and sends the Leave Mail Prefix (if any) +
the digits dialed as the VMID number + the Leave Mail
Suffix digits (if any). The system then cuts through the
transferred caller.
❑
Flex
Btn
❑
Flex
Btn
61