Call Transfer
Executive/Secretary Transfer
If you are designated the Executive station and your
phone is busy or in DND, all calls will be routed to the
Secretary station.
If you are the designated Secretary station, you can signal
the Executive that is busy or in DND by using the Camp-
On feature.
Incoming CO Transfer
While idle or on an internal/external call and an incoming or
transferred CO call is ringing at your station:
1. Place the current call on hold.
2. Dial the INC CO XSFR code [639] or press the pre-
programmed INC CO XSFR flexible button.
3. Press a DSS, Group button, or dial the three-digit station
number or group number. The call is automatically
transferred to that destination.
4. You can then return to the call placed on hold.
PBX/CENTREX Transfer
While connected to an outside line (PBX/Centrex):
1. Press the FLASH button. Transfer dial tone is heard.
2. Dial PBX/Centrex station number.
3. Hang up to complete the transfer.
Screened Transfer
While connected to an outside line:
1. Press the station button where call is to be transferred (if
programmed on your telephone), or press the TRANS
button and dial station number.
The called extension signals according to the intercom
signal switch position.
23