Brocade Communications Systems StoreFabric SN6500B Reference page 925

Brocade fabric os message reference v7.1.0 (53-1002749-01, march 2013)
Hide thumbs Also See for StoreFabric SN6500B:
Table of Contents

Advertisement

ZONE-1059
Message
Unexpected TI routing behavior or a potentially unroutable TI configuration has
been detected on local domain <Domain ID of the local Logical Switch where the
error was detected>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the current fabric topology and TI zone configuration may result in an unroutable condition
or an unexpected routing behavior.
Recommended
Execute the zone --showTIerrors command on the specified switch to report the conflicting
Action
configuration details.
ZONE-1060
Message
Non-TI and TI failover-enabled traffic restricted to domain <Domain ID> due to TI
failover-disabled zoning.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that only TI failover-disabled paths remain to reach the specified domain causing non-TI and TI
failover traffic disruption.
Recommended
Add or restore the non-TI or TI failover-enabled inter-switch links (ISLs) to the specified domain.
Action
ZONE-1061
Message
Some trunk members are missing from failover disabled active TI zones.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that some members in the trunk group are not added to the failover-disabled TI zone. This will
result in traffic disruption if the trunk member goes down.
Recommended
If any trunk member is included in the TI failover-disabled zone path, then always add all members from
that group. Execute the zone --showTItrunkerrors command on the switch to find the missing trunk
Action
members in the TI zone.
Fabric OS Message Reference
53-1002749-01
5
ZONE-1059
903

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os v7.1.0

Table of Contents