Brocade Communications Systems StoreFabric SN6500B Reference page 263

CONF-1024
Message
configUpload failed <Message>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a configUpload operation has failed.
Recommended
Execute the errShow command to view the error log. Correct the error and execute the configUpload
Action command again.
CONF-1030
Message
Configuration database full, data not committed (key: <Key of failed configuration
data>).
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the previous configuration commands have resulted in a database full
condition.Configuration changes associated with the specified key was not applied.
Recommended
Use configure command and various other commands to erase configuration parameters that are no
Action longer required. As a last resort, execute the configDefault command and reconfigure the system.
CONF-1031
Message
configDefault completed successfully <Message>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the configDefault command was initiated and completed successfully.
Recommended
No action is required.
Action
Fabric OS Message Reference
53-1002749-01
5
CONF-1024
241