Brocade Communications Systems StoreFabric SN6500B Reference page 436

5
FICN-1121
FICN-1121
Message
HostPrintIng:LRJ received on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> lastCmds=0x<Last 4 commands
received from the channel for this device> lastStatus=0x<Last 4 status values
presented to the channel for this device> treating as system reset event.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates than a Link Level Reject (LRJ) received from a FICON channel indicates that the channel no
longer has a path established to the Control Unit.
Recommended
This is normally an unexpected event; contact your vendor's customer support for assistance.
Action
FICN-1122
Message
DevPrintIng:UnusualStatus:WriteCancelSelr:Generating Final Ending Status
Path=0x<VEPortNumber HostDomain HostPort DeviceDomain><DevicePort LPAR CUADDR
DeviceAddr>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the FICON Print write pipeline sequence has received unit check status.
Recommended
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
Action customer support for assistance.
FICN-2005
Message
FICON VEPort <VE port number> Feature Change verified Xrc <1 or 0 - XRC Emulation
Enabled or Disabled> TapeWrt <1 or 0 - Tape Write Emulation Enabled or Disabled>
TapeRd <1 or 0 - FICON Tape Read Emulation Enabled or Disabled> TinTir <1 or 0 -
FICON TIN/TIR Emulation Enabled or Disabled> DvcAck <1 or 0 - FICON Device Level
Ack Emulation Enabled or Disabled> RdBlkId <1 or 0 - FICON Write Emulation Read
Block ID Emulation Enabled or Disabled>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the configuration was changed manually.
Recommended
No action is required.
Action
414
Fabric OS Message Reference
53-1002749-01