Brocade Communications Systems StoreFabric SN6500B Reference page 656

5
NSM-1003
NSM-1003
Message
Interface <InterfaceName> is link down.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the specified interface has gone offline because the link is down.
Recommended
Check whether the connectivity between the peer ports is proper, and the remote link is up using the
Action show interface command.
NSM-1004
Message
Interface <InterfaceName> is created.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the specified logical interface has been created.
Recommended
No action is required.
Action
NSM-1005
Message
The FCoE VLAN: <VlanName> is in use. Therefore, cannot disable the FCoE VLAN.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the specified Fibre Channel over Ethernet (FCoE) VLAN is used in the FCoE daemon
(fcoed) and therefore cannot be disabled.
Recommended
Remove all the FCoE sessions from the FCoE VLAN member ports and then disable the FCoE VLAN.
Action
NSM-1006
Message
FCoE on VLAN: <VlanName> has been disabled successfully.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that FCoE has been disabled on the specified VLAN.
634
Fabric OS Message Reference
53-1002749-01