Brocade Communications Systems StoreFabric SN6500B Reference page 665

PDM-1004
Message
PDM memory shortage.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Parity Data Manager (PDM) process ran out of memory.
Recommended
Reboot or power cycle the switch.
Action
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
PDM-1005
Message
FSS register failed.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Parity Data Manager (PDM) failed to register with the Fabric OS synchronization
service (FSS).
Recommended
Execute the firmwareDownload command to reinstall the firmware.
Action
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
PDM-1006
Message
Too many files in sync.conf.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the sync.conf configuration file contains too many entries.
Recommended
Execute the firmwareDownload command to reinstall the firmware.
Action
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
Fabric OS Message Reference
53-1002749-01
5
PDM-1004
643