Brocade Communications Systems StoreFabric SN6500B Reference page 719

SEC-1041
Message
Invalid port member <port member> in portlist (<port list>). <Reason>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the port member is invalid for one of the following reasons:
•
•
•
Recommended
Use valid syntax when entering port members.
Action
SEC-1042
Message
Invalid index/area member <port member> in portlist (<Port list>). Out of range
(<Minimum value> - <Maximum value>).
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the specified index or area member is not within the minimum and maximum range.
Recommended
Use valid syntax when entering index or area numbers.
Action
SEC-1043
Message
Invalid port range <Minimum> - <Maximum>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the specified port is not within the minimum and maximum range.
Recommended
Use valid syntax when entering port ranges.
Action
Fabric OS Message Reference
53-1002749-01
The value is not a number.
The value is too long. Valid numbers must be between one and three characters long.
The value cannot be parsed due to invalid characters.
5
SEC-1041
697