Brocade Communications Systems StoreFabric SN6500B Reference page 429

FICN-1100
Message
HostTeraIng:FICON Selective Reset:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> Elapsed Time=<the number of
seconds since the last IO started for this device>.<the number of milliseconds
since the last IO started for this device> seconds.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that protocol errors in emulation in the Control Unit or network errors can cause Selective
Reset.
Recommended
If this was an unexpected event, contact your vendor's customer support for assistance.
Action
FICN-1101
Message
HostTeraIng:FICON Purge received:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a Purge Path was received from the locally connected FICON channel. This is performed
during the path recovery.
Recommended
If this was an unexpected event, contact your vendor's customer support for assistance.
Action
FICN-1102
Message
HostTeraIng:LRJ received on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> lastCmds=0x<Last 4 commands
received from the channel for this device> lastStatus=0x<Last 4 status values
presented to the channel for this device> treating as system reset event.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a Link Level Reject (LRJ) from a FICON channel indicates that the channel believes that it no
longer has a path established to the Control Unit.
Recommended
This is normally an unexpected event; contact your vendor's customer support for assistance.
Action
Fabric OS Message Reference
53-1002749-01
5
FICN-1100
407