Brocade Communications Systems StoreFabric SN6500B Reference page 435

FICN-1118
Message
HostPrintIng::FICON Selective Reset:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> state=0x<the current emulation
state for this device> LastCmds=0x<the last 4 commands received from the channel
for this device> LastStatus=0x<the last 4 status values presented to the channel
for this device>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the channel recognized a timeout condition and issued a Selective Reset.
Recommended
If this was an unexpected event, contact your vendor's customer support for assistance.
Action
FICN-1119
Message
HostPrintIng:FICON Selective Reset:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> Elapsed Time=<the number of
seconds since the last IO started for this device>.<the number of milliseconds
since the last IO started for this device> seconds.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the channel recognized a timeout condition and issued a Selective Reset.
Recommended
If this was an unexpected event, contact your vendor's customer support for assistance.
Action
FICN-1120
Message
HostPrintIng:FICON Purge received:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a Purge Path was received from the locally connected FICON channel. This is performed
during FICON path recovery.
Recommended
If this was an unexpected event, contact your vendor's customer support for assistance.
Action
Fabric OS Message Reference
53-1002749-01
5
FICN-1118
413