Brocade Communications Systems StoreFabric SN6500B Reference page 373

3. Use zoning commands on the edge fabrics, to reduce the LSAN zone entries on the edge
4. Use the
FCR-1021
Message
Local LSAN device entries exhausted.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the number of devices created through logical storage area network (LSAN) zones within
the MetaSAN exceeds the local LSAN zone database limitations.
Recommended
Remove excess device entries within LSAN zones so that the number of devices is within the range of
Action the local zone database limitations.
FCR-1022
Message
Local proxy device slot entries exhausted.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that resources to persistently store the proxy device slot to the remote world wide name (WWN)
have been consumed.
Recommended
Remove the proxy device slots by using the fcrProxyConfig command or limit proxy devices by
Action removing logical storage area network (LSAN) zone entries.
FCR-1023
Message
Local phantom port WWN entries exhausted.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the number of port World Wide Names (WWNs) detected to be in use exceeds the local
port WWN resources.
Recommended
Limit the number of port WWNs required by limiting the remote edge fabric connectivity (which limits the
Action number of translate domains). You can also limit the number of proxy devices for a translate domain
(which limits the number of translate domain ports required) by limiting the devices specified in logical
storage area network (LSAN) zones.
Fabric OS Message Reference
53-1002749-01
fabrics.
command on each EX_Port, one at a time, and verify that this error is not
portEnable
reported again.
5
FCR-1021
351