Brocade Communications Systems StoreFabric SN6500B Reference page 417

FICN-1066
Message
MemAllocFailed for GEPort=<VEPortNumber> VEport=<GE0 or GE1 number> could not
create required structure.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates an internal resource limit has been encountered so that additional control block memory could
not be allocated.
Recommended
This is an unexpected event; either the maximum number of emulation devices are already in use or
Action there is an internal memory leak. Contact your vendor's customer support for assistance.
FICN-1067
Message
Ingress Abort:Oxid=0x<the OXID of the aborted exchange>:Abort for
CH=0x<VEPortNumber HostDomain HostPort DeviceDomain><DevicePort LPAR>****.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an abort operation has been received from a local FC interface for an emulation CH exchange.
Recommended
If there were associated I/O errors at the same time as this event, contact your vendor's customer
Action support for assistance.
FICN-1068
Message
Ingress Abort:Oxid=0x<the OXID of the aborted exchange>:Abort for
CU=0x<VEPortNumber HostDomain HostPort DeviceDomain><DevicePort LPAR><CUADDR>**.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an abort operation has been received from a local FC interface for an emulation Control Unit
exchange.
Recommended
If there were associated I/O errors at the same time as this event, contact your vendor's customer
Action support for assistance.
Fabric OS Message Reference
53-1002749-01
5
FICN-1066
395