Brocade Communications Systems StoreFabric SN6500B Reference page 634

5
MFIC-1003
Recommended
IDID mode is a fabric-wide mode; make sure that any switches added to the fabric are configured with
Action the same IDID mode as the fabric. If you are enabling or disabling IDID mode, this message is for
information purposes only, and no action is required. IDID mode can be set using the configure
command in the CLI or checking the Advanced Web Tools Switch Admin > Configure > Fabric >
Insistent Domain ID Mode check box. The switch must be disabled to change the IDID mode.
Fabric OS Message Reference
612
53-1002749-01