Brocade Communications Systems StoreFabric SN6500B Reference page 410

5
FICN-1045
FICN-1045
Message
HostTapeIng:FICON Purge received:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a Purge Path was received from the locally connected FICON channel. This is performed
during the path recovery.
Recommended
If this was an unexpected event, contact your vendor's customer support for assistance.
Action
FICN-1046
Message
HostTapeIng:LRJ received on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> lastCmds=0x<Last 4 commands
received from the channel for this device> lastStatus=0x<Last 4 status values
presented to the channel for this device> treating as system reset event.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a Link Level Reject (LRJ) from a FICON channel indicates that the channel no longer has a
path established to the Control Unit.
Recommended
This is normally an unexpected event; contact your vendor's customer support for assistance.
Action
FICN-1047
Message
fcFicSetEmulation:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> FDCB Not Idle state=0x<Current
emulation state of the FICON device> prevState=0x<Previous emulation state of the
FICON device> set to state=0x<The new state to which the device is transitioning>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates there is an internal emulation error. This message should not be encountered.
Recommended
This is an unexpected event; contact your vendor's customer support for assistance.
Action
388
Fabric OS Message Reference
53-1002749-01