Brocade Communications Systems StoreFabric SN6500B Reference page 222

5
C3-1021
C3-1021
Message
S<slot number>,P<port number>(<blade port number>): Port is offline due to
Encryption Compression Block error.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that an internal error is observed in the application-specific integrated circuit (ASIC) hardware
that may degrade the data traffic.
Recommended
When this error occurs, the software will automatically recover from the error and no action is required.
Action However, if the problem persists, replace the blade.
C3-1023
Message
Single RDY/Frame Loss detected and recovered on Slot <slot number>,Port <port
number>(<blade port number>) rdy(0x<Credit Lost>)/frame(0x<Frame Lost>).
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that above-normal errors are observed in hardware that may or may not impact the data traffic.
Recommended
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
Action slotPowerOn commands. If the problem persists, replace the blade.
C3-1025
Message
S<slot number>,P<port number>(<blade port number>): Extra credit on
F_port:ftx=<ftx> curr_cred=<current credits> actual_cred=<actual credits>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the device is returning the wrong number of receiver-ready (R_RDY) frames.
Recommended
When this error is observed persistently, replace the device.
Action
200
Fabric OS Message Reference
53-1002749-01