Brocade Communications Systems StoreFabric SN6500B Reference page 354

5
FCOE-1019
Recommended
Disable the active FCoE session on VLAN using the no fcoe command and try adding the FCMAP
Action again.
FCOE-1019
Message
FLOGI ignored as FCMAP is not configured on FCoE VLAN.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that FCMAP has not been configured on FCoE VLAN.
Recommended
Configure FCMAP on the FCoE VLAN using the fcoe --fcmapset command.
Action
FCOE-1021
Message
Port is already logged in.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the N_Port device has already logged in or is in the process; duplicate FLOGI received.
Recommended
No action is required.
Action
FCOE-1022
Message
Max FCoE device login limit reached.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the switch has reached its maximum allowed FCoE device limit.
Recommended
Do not add any more FCoE devices to the switch.
Action
332
Fabric OS Message Reference
53-1002749-01