Brocade Communications Systems StoreFabric SN6500B Reference page 597

IPS Messages
IPS-1001
Message
<message> FTR_AFA/FTR_AE License Not Installed (<error>).
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that either Advanced FICON Acceleration (FTR_AFA) or Advanced Extension (FTR_AE)
license is not installed or assigned to the slot.
Recommended
Run the licenseShow command to verify the slot-based licenses are installed on the switch. Contact
Action your switch supplier for an appropriate slot-based license. Run the licenseAdd and licenseSlotCfg
commands to add the license to your switch and activate it.
IPS-1002
Message
Failed to initialize <module> rc = <error>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the initialization of a module within the IPS daemon failed.
Recommended
Download a new firmware version using the firmwareDownload command.
Action
IPS-1003
Message
<function name>: Failed to allocate memory while performing <message>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that memory resources are low. This may be a transient problem.
Recommended
Check the memory usage on the switch using the memShow command.
Action
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
Fabric OS Message Reference
53-1002749-01
5
IPS-1001
575