Brocade Communications Systems StoreFabric SN6500B Reference page 649

NBFS Messages
NBFS-1001
Message
Duplicate E_Port SCN from port <portnumber> in state <state change name> (<state
change number>).
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a duplicate E_Port state change notification (SCN) was reported. The neighbor finite state
machine (NBFSM) states are as follows:
•
•
•
•
•
•
Recommended
No action is required.
Action
NBFS-1002
Message
Wrong input: <state name> to neighbor FSM, state <current state name>, port
<portnumber>.
Message Type
FFDC | LOG
Severity
ERROR
Probable Cause
Indicates the wrong input was sent to the neighbor finite state machine (NBFSM). NBFSM states are as
follows:
•
•
•
•
•
•
If this error occurs repeatedly, then there is a problem in the protocol implementation between two
switches.
Recommended
Run the nbrStateShow command to check the neighbor state of the port listed in the message. If it is
Action Full, then this message can safely be ignored. Otherwise, run the portDisable and portEnable
commands to refresh the port.
Fabric OS Message Reference
53-1002749-01
0 - Down
1 - Init
2 - Database Exchange
3 - Database Acknowledge Wait
4 - Database Wait
5 - Full
0 - Down
1 - Init
2 - Database Exchange
3 - Database Acknowledge Wait
4 - Database Wait
5 - Full
5
NBFS-1001
627