SEC-1093
Message
New FCS list must have at least one member in common with current FCS list.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the new fabric configuration server (FCS) list does not have a common member with the
existing FCS list.
Recommended
Resubmit the command with at least one member of the new FCS list in common with the current FCS
Action
list.
SEC-1094
Message
Policy member not found.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates a corruption occurred during the distribution of the security database. This can only occur when
the primary fabric configuration server (FCS) distributes the security database to the other switches in
the fabric, and then local validation finds that there is an error in the security database. This is a rare
occurrence.
Recommended
Run the fabricShow command to verify that the fabric is still consistent. All the switches should be in the
Action
ready state. If a switch is in the error state, the database may not be correctly updated for that specific
switch.
SEC-1095
Message
Deleting FCS policy is not allowed.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates a corruption occurred during the distribution of the security database. This can only occur when
the primary fabric configuration server (FCS) distributes the security database to the other switches in
the fabric, and then local validation finds the error in the security database. This is a rare occurrence.
Recommended
Run the fabricShow command to verify that the fabric is still consistent. All the switches should be in the
ready state. If a switch is in the error state, the database may not be correctly updated for that specific
Action
switch.
Fabric OS Message Reference
53-1002749-01
5
SEC-1093
711